An earlier version of the issue 2 Euro
Dizzy board. Newer issue 2 boards have green solder mask instead
of red.
This is a power distribution board
supporting eight 16-way IDC headers and four faston headers for
power entry. Also present are two 0.1″ headers that connect
to the CV and gate bus and three LED power ready indicators.
The 2oz copper double sided circuit board
is 5.6″ (142mm) long by 2.35″ (60mm) wide. It is
designed to go at the rear of 19″ rack units or built into
the bottom panel of wooden modular cases. Short distribution
boards with centrally located power inlets, such as this one,
offer lower resistance connections than longer thinner
distribution boards.
An optional 0V point is also available
which can be used for additional grounding. Please note that the
newer versions of this board now have green solder mask and not
red as shown in these pictures.
This is a mains powered build of the Oakley
Euro PSU being used to power four Euro Dizzy boards.
Project Downloads
Construction
Guide Our handy guide to building
Oakley DIY projects
Parts
Guide Our handy guide to buying
parts for Oakley DIY projects
Three Euro Dizzy boards powered from one
Oakley Euro PSU fitted to a 4U high aluminium 19″ rear
mounted panel in a 6U high rack case from All Metal Parts. Module
mounting rails and rack ends from Tip Top Audio.
Back to Eurorack projects page: Projects
Back home